316 series stainless steel differs from 18-8 by its molybdenum content (2-3%) and a higher nickel content (10-14%)

1/2-13 x 9 Hex Cap Screw SS 18-8 (A2)

000 psi is required

Typical hardness will range from HRB 69-100 and tensile strength will meet a minimum 60

1/2 x 16 Hex Lag Screw Hot Dipped Galvanized 1/2-13 Hex Cap Screws 316 Stainless Steel 316 series stainless steel differs1 2 x 16 Hex Lag Screw Hot Dipped Galvanized . Hex Lag Screws are manufactured from low carbon steel to meet SAE J429 Grade 1. Lag screws longer than 12 inches will have a minimum thread length of 50% of the screw length up to a maximum of 8 inches. Zinc plated material will meet or exceed ASTM F1941. Hot Dip Galvanized material will meet or exceed ASTM A153. Typical hardness is HRB 70 100. Tensile strength (not pull out) will meet a minimum of 60,000